| Item Name | SHANK TAPER | L mm | L1 mm | L2 mm | ØD mm | ØD1 mm | Ød mm | M (THREAD) | A/F mm | S/F mm |
|---|---|---|---|---|---|---|---|---|---|---|
| CNC MT2 Dead Center With Draw-off Nut Extended Plain Male Point | MT-2 | 64.0 | 48.0 | 52.0 | 18.0 | 17.780 | 8 | M22 X 1.5 | 14 | 15 |
| CNC MT3 Dead Center With Draw-off Nut Extended Plain Male Point | MT-3 | 81.0 | 57.0 | 67.0 | 24.1 | 23.825 | 11 | M27 X 1.5 | 19 | 21 |
| CNC MT4 Dead Center With Draw-off Nut Extended Plain Male Point | MT-4 | 102.5 | 72.5 | 83.5 | 31.6 | 31.267 | 14 | M36 X 1.5 | 27 | 28 |
| CNC MT5 Dead Center With Draw-off Nut Extended Plain Male Point | MT-5 | 129.5 | 87.5 | 107.0 | 44.7 | 44.399 | 18 | M48 X 1.5 | 36 | 40 |
| CNC MT6 Dead Center With Draw-off Nut Extended Plain Male Point | MT-6 | 182.0 | 108.5 | 145.0 | 63.8 | 63.348 | 20 | M68 X 1.5 | 55 | 56 |
Brand: ToolsEngg : Plant 1
Weight: 1.20kg
Made from Bearing steel EN-31 and through hardened to 58 to 60 HRc.
Broadly confirms to DIN:807
Precision ground. Tip runout within 0.015 mm. w.r.t. Taper.
Application: On CNC Lathes with Live Tail Stock. Draw off Nut to be used to remove/extract the dead center from the Tailstock
St..
$17.48 USD
Brand: ToolsEngg : Plant 1
Weight: 1.20kg
Made from Bearing steel EN-31 and through hardened to 58 to 60 HRc.
Broadly confirms to DIN:807
Precision ground. Tip runout within 0.015 mm. w.r.t. Taper.
Application: On CNC Lathes with Live Tail Stock. Draw off Nut to be used to remove/extract the dead center from the Tailstock
St..
$17.48 USD
Brand: ToolsEngg : Plant 1
Weight: 1.20kg
Made from Bearing steel EN-31 and through hardened to 58 to 60 HRc.
Broadly confirms to DIN:807
Precision ground. Tip runout within 0.015 mm. w.r.t. Taper.
Application: On CNC Lathes with Live Tail Stock. Draw off Nut to be used to remove/extract the dead center from the Tailstock
St..
$20.20 USD
Brand: ToolsEngg : Plant 1
Weight: 1.20kg
Made from Bearing steel EN-31 and through hardened to 58 to 60 HRc.
Broadly confirms to DIN:807
Precision ground. Tip runout within 0.015 mm. w.r.t. Taper.
Application: On CNC Lathes with Live Tail Stock. Draw off Nut to be used to remove/extract the dead center from the Tailstock
St..
$50.78 USD
Brand: ToolsEngg : Plant 1
Weight: 6.50kg
Made from Bearing steel EN-31 and through hardened to 58 to 60 HRc.
Broadly confirms to DIN:807
Precision ground. Tip runout within 0.015 mm. w.r.t. Taper.
Application: On CNC Lathes with Live Tail Stock. Draw off Nut to be used to remove/extract the dead center from the Tailstock
St..
$105.93 USD
Showing 1 to 5 of 5 (1 Pages)